Set 960012
These formations have been noted:
No formation details found.
16th November 1998
977860 - set number 960 012 - is seen at Moreton on 16 November 1998. Brian Daniels.
17th October 1999
Class 121 977860, set number 960 012, is seen at Gerards Cross on route learning duty, 17.10.1999. Andy Cole.
17th October 1999
Class 121 977860 (ex-55028), set number 960012, is seen at Gerards Cross on sandite duty on 17.10.1999. Andy Cole.
6th August 2000
Class 121 977860, set number 960 012, is seen stabled at Aylesbury on 06.08.2000. It was converted from 55028 to a sandite car. Andy Cole.
September 2001
Departmental DMUs. 977860 in the yard at Butterley in September 2001 beside 975010 before entering the carriage shed for repairs and a repaint. Work has already begun, a window has been removed mid-way along the bodyside beside the steps. Stuart Mackay.
September 2001
The van area of 977860, reduced in size for its sandite / route-learning use. Taken in September 2001 at Butterley. Stuart Mackay.
September 2001
The generator inside 977860, taken at Butterley in September 2001. Stuart Mackay.
September 2001
The drivers sandite controls, No.1 cab of 977860. Taken at Butterley in September 2001. Note there were two different type of sandite that that could be applied: standard sandite and s4 sandite. Stuart Mackay.
September 2001
977860 No.1 end (opposite end from the van) cab, taken at Butterley in September 2001. Stuart Mackay.
September 2001
Pressed Steel bubble 977860 visited the Midland Railway Centre in late 2001 for bodywork repairs and a repaint for Balfour Beatty Rail. It is seen here after arrival about to be shunted into the yard at Butterley in early September. Stuart Mackay.
September 2001
977860 in the yard at Butterley awaiting entrance to the carriage shed for repairs, September 2001. Stuart Mackay.
September 2001
The Sandite hoppers inside 977860. It's Sandite days had ended, they would soon be removed. Taken at Butterley in September 2001. Stuart Mackay.
September 2001
The cab bulkhead in 977860, adapted for better visibility for route learning. Note the all-important kettle and toastie maker, possibly due to the generator on the vehicle. Taken at Butterley in September 2001. Stuart Mackay.
September 2001
The revised seating in 977860 for route learning. The partition is new too, behind is the sandite tanks. Taken at Butterley in September 2001. Stuart Mackay.
13th May 2005
The South West Train route learning vehicle 977860 (ex 55028) seen at Alresford on the Mid-Hants with 55003 on 13/5/05. Ian McDonald.
5th April 2006
977860 at Salisbury on the 5th April 2006. Steve White.
5th April 2006
977860 at Salisbury on the 5th April 2006. Steve White.
5th April 2006
977860 at Salisbury on the 5th April 2006. Steve White.
5th April 2006
977860 at Salisbury on the 5th April 2006. Steve White.
13th April 2006
South West Trains route learning DMU 960012 / 977860 at Woking on 13 April 2006. Tony Watson.
16th October 2006
977860 stabled at Salisbury on the 16th October 2006. Philip Wagstaff.
20th January 2007
SWT route-learner 977860, ex-55028, at Salisbury on 20 January 2007. David Mant.
20th January 2007
The John Cameron nameplate on SWT route learner 977860 at Salisbury on 20 January 2007. David Mant.
20th January 2007
Front end detail on SWT route-learner 977860 at Salisbury on 20 January 2007. David Mant.
20th January 2007
SWT route-learner 977860, ex-55028, at Salisbury on 20 January 2007. David Mant.
24th April 2008
977860 at Yeovil Pen Mill on April 24, 2008. Nigel Walls.
24th April 2008
977860 Yeovil Pen Mill on April 24, 2008. Nigel Walls.
Do you have any images of the set you can add?