Fluid Flywheel - To Dismantle and Assemble from BUT manual

(refer to pictures: section through A-type or L-type, exploded view of L-type, and part cut away.)

To Dismantle

1. Remove the Fluid Coupling.
2. Remove the bellows gland.
3. To remove the rear casing from the runner shaft use a lead hammer on the splined end of the shaft. The bearing can then be removed if required.
4. Remove the bolts securing the baffle plate to the runner and remove the baffle plate.
5. Remove the bolts securing the runner shaft to the runner and separate the parts.

To Assemble

Reverse the procedure for dismantling, making special note of the instructions given in refitting the bellows gland and coupling.